100 Denier Nylon Taffeta
Practical Applications: submarine escape suits, immersion suits, marine/aviation raft canopies, underground pipe liners
Technical Specifications
Please note: We are not limited to these specifications below and can customize the fabric to meet your specific needs.
| Test | Average Result (Standard Units) | Average Result (International Units) |
|---|---|---|
| Base Fabric Weight | 2.0 Ounces / Square Yard | 68 Grams / Square Meter |
| Total Weight | 4.5 Ounces / Square Yard | 153 Grams / Square Meter |
| Tongue Tear |
|
|
| Tensile Strength |
|
|
| Elongation at Break | 33% Warp / 42% Weft | 33% Warp / 42% Weft |
| Breakaway Adhesion (RF Weld) Film to Film |
52 Pounds (f) / Inch Warp | 228 Newtons (f) / 25 Millimeters Warp |
| Strip Adhesion (Heat Sealed) Film to Film |
38 Pounds (f) / Inch Warp | 166 Newtons (f) / 25 Millimeters Warp |
| Hydrostatic High Pressure | 180 Pounds (f) / Square Inch | 1241 Kilopascals |
| Hydrostatic Low Pressure | Pass 1.5 PSA / No Leaks / 5 Minutes | Pass 10 KPA / No Leaks / 5 Minutes |
| Air Retention (Film Side Only) |
Pass 10 PSI / No Leaks / 5 Minutes | Pass 69 KPA / No Leaks / 5 Minutes |
| Low Temperature | No Cracking, Flaking, or Separation at -60° Fahrenheit for 4 Hours |
|
| Blocking (Film to Film) |
No Blocking at 180°F for 30 Minutes | |
| Mildew Resistance | Fabric Passes Mil-STD.810 F |