Products

30 Denier Nylon Ripstop

Practical Applications: helium/hydrogen parade balloons, helium/hydrogen balloon ballonets, remote controlled indoor airships, parachute cloth

30 Denier Nylon Ripstop

Technical Specifications

Please note: We are not limited to these specifications below and can customize the fabric to meet your specific needs.

Technical Specifications
Test Average Result (Standard Units) Average Result (International Units)
Base Fabric Weight 1.1 Ounces / Square Yard 37 Grams / Square Meter
Total Weight 3.0 Ounces / Square Yard 102 Grams / Square Meter
Tongue Tear
  • 1.0 Pounds (f) Warp
  • 1.0 Fill
  • 4 Newtons (f) Warp
  • 4 Weft
Tensile Strength
  • 55 Pounds (f) / Inch Warp
  • 50 Fill
  • 241 Newtons (f) / 25 Millimeters Warp
  • 219 Weft
Breakaway Adhesion
(RF Weld) Film to Film
10 Pounds (f) / Inch Warp 44 Newtons (f) / 25 Millimeters Warp
Strip Adhesion
(Heat Sealed) Film to Film
5 Pounds (f) / Inch Warp 22 Newtons (f) / 25 Millimeters Warp
Hydrostatic High Pressure 80 Pounds (f) / Square Inch 552 Kilopascals
Hydrostatic Low Pressure Pass 1.5 PSA / No Leaks / 5 Minutes Pass 10 KPA / No Leaks / 5 Minutes
Air Retention
(Film Side Only)
Pass 3 PSI / No Leaks / 5 Minutes Pass 21 KPA / No Leaks / 5 Minutes
Low Temperature No Cracking, Flaking, or Separation at
-40° Fahrenheit for 4 Hours
No Cracking, Flaking, or Separation at
-40° Celsius for 4 Hours
Blocking
(Film to Film)
No Blocking at 180°F for 30 Minutes