70 x 100 Denier Nylon Twill
Practical Applications: hospital air beds, hospital patient transfer devices, gel filled wheelchair seat cushions, helium/hydrogen parade balloons
Technical Specifications
Please note: We are not limited to these specifications below and can customize the fabric to meet your specific needs.
| Test | Average Result (Standard Units) | Average Result (International Units) |
|---|---|---|
| Base Fabric Weight | 2.8 Ounces / Square Yard | 95 Grams / Square Meter |
| Total Weight | 5.9 Ounces / Square Yard | 200 Grams / Square Meter |
| Tongue Tear |
|
|
| Tensile Strength |
|
|
| Elongation at Break | 25% Warp / 33% Weft | 25% Warp / 33% Weft |
| Breakaway Adhesion (RF Weld) Film to Film |
57 Pounds (f) / Inch Warp | 250 Newtons (f) / 25 Millimeters Warp |
| Strip Adhesion (Heat Sealed) Film to Film |
42 Pounds (f) / Inch Warp | 184 Newtons (f) / 25 Millimeters Warp |
| Hydrostatic High Pressure | 230 Pounds (f) / Square Inch | 1586 Kilopascals |
| Hydrostatic Low Pressure | Pass 1.5 PSA / No Leaks / 5 Minutes | Pass 10 KPA / No Leaks / 5 Minutes |
| Air Retention (Film Side Only) |
Pass 10 PSI / No Leaks / 5 Minutes | Pass 69 KPA / No Leaks / 5 Minutes |
| Low Temperature | No Cracking, Flaking, or Separation at -60° Fahrenheit for 4 Hours |
|
| Blocking (Film to Film) |
No Blocking at 180°F for 30 Minutes | |
| Mildew Resistance | Fabric Passes Mil-STD.810 F |